5 DIY Methods To Fix Washing Machine Leaks

5 DIY Methods To Fix Washing Machine Leaks

Table of Contents

When you have a leaking washing machine it is a frustrating and messy issue – to say the least.

Not only does it require your immediate attention but it can also cause water damage to your property.

In addition to this, when your washing machine leaks it will cause malfunctions in the machine itself.

So… if you’re struggling with this problem, we’ve compiled a few tips for you to try and hopefully fix your washing machine without professional help.

Let’s get started.

The 5 Methods To Fix Washing Machine Leaks

1. Inspect Door Seal

Your door seal is also known as the gasket.

Your washing machine gasket is a rubber ring that creates a watertight seal when the machine door is closed.

This seal can get worn out over time with usage.

Sometimes, even the dirt and debris from the clothes can compromise the integrity of the seal – which leads to leaks.

To check the door seal, follow the following steps…

  1. Inspect the seal visually for any visible signs of damage, such as cracks or tears.
  2. Run your fingers along the seal to feel for any irregularities, paying attention to soft spots or deformities.
  3. Clean the seal with a mild detergent and warm water to remove any accumulated grime or soap residue.


If you find any damage or if the seal appears worn, it may be time to replace it. 

Also Read: How to fix washing machine drain smell?

2. Tighten (Or Replace) Door Hinges

Loose or damaged door hinges can also contribute to a leaking washing machine.

Your washing machine door hinges hold the door securely in place – thus ensuring a tight seal.

To check your washing machine’s door hinges, follow the following steps…

  1. Inspect the hinge for any visible signs of damage, such as rust or misalignment.
  2. If the hinge is loose, tighten the screws using a screwdriver. Be careful not to overtighten, as this may cause damage.
  3. If the hinge is severely damaged or rusted, it may need to be replaced. Consult your washing machine’s manual for guidance on obtaining a compatible hinge, and follow the manufacturer’s instructions for proper installation.


Regular maintenance, such as tightening loose screws, can help prevent future leaks and extend the life of your washing machine.

3. Examine The Detergent Dispenser

Sometimes, a leaking washing machine may be a result of issues with the detergent dispenser 

To fix a leaking detergent dispenser, here’s what you can do…

  1. Check the detergent dispenser for any cracks or visible damage.
  2. Ensure that the dispenser drawer is properly closed and aligned.
  3. Clean the dispenser compartment to remove any detergent residue or blockages.


If you discover cracks or damage to the detergent dispenser, it may need to be replaced.
 

4. Inspect The Drain Pump & Hose

If you have a malfunctioning drain pump or a broken hose, it could also contribute to water leaks around the washing machine.

The drain pump is responsible for removing water from the machine during the washing cycles, and if it’s blocked or damaged, water may accumulate and lead to leaks. 

To address this issue…

  1. Check the drain pump filter. Most washing machines have a filter located near the front, typically behind a panel. Consult your washing machine’s manual for the exact location of the filter. Remove any debris or lint that may be obstructing the filter.
  2. Inspect the water waste hose. Ensure that the water waste hose is securely attached and not kinked or damaged. If the hose has cracks or leaks, it may need to be replaced.

Regular maintenance of the drain pump and hose can prevent water buildup, and consequently, leaks around the washing machine.

5. Level Your Washing Machine

An improperly levelled washing machine can cause a leakage from your product.

If the machine is not levelled, it may vibrate excessively – ultimately leading to shifts in water distribution.

To ensure your washing machine is levelled, you can…

  1. Place a bubble level on top of the machine to check for horizontal and vertical levelness. Adjust the levelling feet at the bottom of the machine to achieve proper balance if required.
  2. Ensure that the floor under the washing machine is stable and level. If the floor is uneven, it may affect the balance of the machine during operation.


By maintaining a level position, your washing machine will operate more smoothly, reducing the risk of water leaks and ensuring consistent performance over time. 

Conclusion

If your washing machine is leaking, it will require your immediate attention.

By trying out the above tips and tricks, there is a good chance that your washing machine leak will be resolved.

However, that will not always be the case, and the problem may be more complicated.

That’s where it will be better to have a professional called out to resolve the leak for you.

If you want some of the best prices for your appliance repairs in North London or East London, call Georgi’s Services right away.

You can contact us directly and we would be more than happy to help.

We highly recommend checking out our prices too.